The TS1200HS spreader is utilised by private sector contractors, water companies and local authorities who find the TS1200HS allows them to grit multiple sites efficiently. Its 1500 kg capacity makes it suitable for gritting roadways and car parks.
The TS1200HS achieved EC whole vehicle type approval (ECWVTA). A high speed trailed salt spreader with a hopper capacity of 1.2m3 to take approximately 1500 kg of salt. Capable of spreading wet or dry - brown or white salt via its unique Pozi-Feed stainless steel auger system. Fitted with high quality twin braked axles and road going wheels and tyres. The spreading circuit is powered by an on board electric start engine.
Specifications
- 1.2m3 mild steel hopper
- Hydraulically driven stainless steel disc, with adjustable spread width from 1.8 m to 8 m
- Manually adjustable spread width valve (graduated)
- Symmetric and asymmetric patern achievable by adjusting the stainless steel feed chute
- 150mm stainless steel Pozi-Feed double augers providing positive salt feed even with wet material, driven hydraulically through a heavy duty high load hydraulic motor
- Pozi-Feed augers run in maintenance free nylon bushes
- Manually adjustable application rate valve (graduated)
- 60 litre hydraulic fluid tank complete with canister type spin-on return line filter, breather cap and sight gauge
- Hydraulically powered from an on board key start Yanmar L70 N diesel auxiliary engine with battery
(Basic) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon and Work light
- Heavy duty 50 mm cast drawbar ball over-run coupling
- High quality twin axles fitted with torsion spring suspension and automatic brakes
- 8 ply road going wheels and tyres
- Tandem plastic mudguards
- Jockey wheel
- Galvanised pitched metal hopper cover with access hatch
- All metal work blast cleaned, prior to zinc rich powder prime and finished in polyester powder coat finish
- Full road lighting with high quality rubberized lighting components to resist salt corrosion
- Rear mounted xenon low current beacon
- Stainless steel fasteners used where possible
- Fluorescent markings on rear
Options
- Wired to enable the spreading action to be controlled via the towing vehicles fog light switch meaning no control boxes are required to be wired to the vehicle, a separate auger reverse switch and beacon switch is mounted to the control panel of the spreader. An LED work light cannot be fitted with this option
- (Width) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve
- (Width/Application) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve, Application rate control in lieu of manually adjustable application rate valve
- Rear mounted low current xenon beacon
- Rear mounted LED work light (red) only available if the machine is specified with a control box
- High speed spreading disc to spread up to 15 m
- 40 mm ring hitch in lieu of the 50 mm cast drawbar ball coupling
- On board key start petrol Honda auxiliary engine with battery in lieu of the Yanmar L70N diesel engine
- Spare wheel and tyre (supplied loose
Product Gallery
