The TS500HS ideal for gritting car parks and narrow lanes with a spread width of up to 8 metres. Light gross vehicle weight of only 1500 kg - it can be used with small towing vehicles. A cost effective option for adding winter maintenance resilience.
The TS500HS achieved EC whole vehicle type approval (ECWVTA). A high speed trailed salt spreader with a hopper capacity of 0.5m3 to take approximately 600kg of salt. Capable of spreading wet or dry - brown or white salt via its unique Pozi-Feed stainless steel auger system. Fitted with high quality braked axles and road going wheels and tyres. The spreading circuit is powered by an on board electric start engine.
Specifications
- 0.5 m3 mild steel hopper
- Hydraulically driven stainless steel disc, with adjustable spread width from 1.8m to 8m
- Manually adjustable spread width valve (graduated)
- Symmetric and asymmetric patern achievable by adjusting the stainless steel feed chute
- 100mm stainless steel Pozi-Feed double augers providing positive salt feed even with wet material, driven hydraulically through a heavy duty high load hydraulic motor
- Pozi-Feed augers run in maintenance free nylon bushes
- Manually adjustable application rate valve (graduated)
- 60 litre hydraulic fluid tank complete with canister type spin-on return line filter, breather cap and sight gauge
- Hydraulically powered from an on board Yanmar L70 N diesel auxiliary engine with battery
- (Basic) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon and Work light
- Heavy duty 50 mm cast drawbar ball over-run coupling
- High quality axles fitted with torsion spring suspension and automatic brakes
- 8 ply road going wheels and tyres
- Single arch plastic mudguards
- Jockey wheel
- Galvanised pitched metal hopper cover with access hatch
- All metal work blast cleaned, prior to zinc rich powder prime and finished in polyester powder coat finish
- Full road lighting with high quality rubberized lighting components to resist salt corrosion
- Rear mounted xenon low current beacon
- Stainless steel fasteners used where possible
- Fluorescent markings on rear
Options
- Wired to enable the spreading action to be controlled via the towing vehicles fog light switch meaning no control boxes are required to be wired to the vehicle, a seperate auger reverse switch and beacon switch is mounted to the control panel of the spreader. An LED work light cannot be fitted with this option.
-
(Width) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve
- (Width/Application) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve, Application rate control in lieu of manually adjustable application rate valve
- Rear mounted low current xenon beacon
- Rear mounted LED work light (red) only available if the machine is specified with a control box
- High speed spreading disc to spread up to 15 m
- 40 mm ring hitch in lieu of the 50 mm cast drawbar ball coupling
- Spare wheel and tyre (supplied loose)
Product Gallery
