TD700 - 700 Litre (0.7m³) demount top dresser

Designed for use with John Deere Pro-gator, Toro Workman and Jacobsen Truckster type vehicles, the top dressers are attached using the existing pin points and ram mount which makes the top dresser easy and quick to mount and demount.

The TD700 takes its hydraulic power from the prime mover’s hydraulic system, which provides the power for the disc and belt. The hopper sides are purposely steep and have an uninterrupted material flow onto the belt. The belt is cleated to ensure that the material is dispensed positively from the hopper onto the disc ensuring a smooth and consistent feed.

Specification

• 0.7 m³ (700 litre) Mild Steel Hopper with steep sides and an uninterrupted material flow onto the belt

• Hydraulically driven twin 650 mm spreading discs with adjustable stainless steel vanes spreading from 2 metres up to 15 metres – dependent on hydraulic oil flow available and material type and condition

• Overrun valves fitted to the disc motors to eliminate hydraulic spikes to the system which can cause damage to hoses

• Manually adjustable control of the spreading width and conveyor belt speed with 18 detent position

• Adjustable disc position to fine tune spreading pattern by changing the drop point on the spreading discs

• Multi position rear variable discharge door

• 400 mm wide PVC belt with central under tracking to maintain belt position on the drums, with two third length horizontal cleats for positive material distribution on to the discs

• Large drive and idle drums lagged in neoprene material to give superior grip and reduce belt wear

• Hydraulically powered from the utility vehicles auxiliary hydraulic circuit (spool valves)

• Spreading disc action controlled by activation and de-activation of the auxiliary hydraulic circuit (spool valves) conveyor belt controlled in cab on/off switch

• Under belt cleaning brush

• Bolt on mounting brackets to suit various utility vehicles

• Demounting spreader stands with rear telescopic stands for safe demounting of the top dresser when in storage

• All metal work blast cleaned, prior to zinc rich powder prime and finished in polyester powder coat finish

Optional Items

(Width/Application) In-cab control box to control the following:

• Spreading discs/belt on-off

• Belt on-off

• Spreading width control in lieu of manually adjustable spread width valve

• Application rate control in lieu of manually adjustable application rate valve